Next Project - Will be for sale!!

So, as I wrap up the finish on the Book Nook, I am moving on to another project; I will post pictures of the finished Book Nook once the finish is all done.

This next project is going to be a Shaker inspired side table, very similar to the bedside tables I have already done, just different dimensions; also, this piece will be FOR SALE upon completion! I have not finalized a price yet so stay tuned. Anyways, this piece will be made out of cherry and curly maple. I am using some of the same cherry that I did for the Book Nook, procured from Peach State Lumber. The "plans" I am using call for 1 1/2" square legs (I put 'plans' in quotes because I am not really going off of one specific plan, but a combination of a few). So, for the legs I am going to use 8/4 lumber to give me that finished dimension. Also, I select a board wide enough that I can get all 4 legs from the same width of wood for grain continuity. Below is a picture of how I did that.

From Shaker Table

As you can see in this photo, the grain all lines up so you know it all came from the same board. How I keep them all lined up prior to cutting is by numbering them and putting witness marks on the end of the board.

From Shaker Table

Once all the leg pieces are rough cut, I use my Lee Valley low angle smoother to smooth all side of the legs to final dimensions. This smoother leaves a surface that is glass smooth and ready for finish; I love this thing! Take a look at these full length shavings.

From Shaker Table

Ok, enough for now. My next order of business will be to mill up the parts that will make up the sides and back. Then I will work on the mortise and tenon joints to hold it all together. So, until then...

Be Safe!

Book Nook - Part 2

So, last time I left off I had routed the dados to receive the shelves. My next order of business as to mill up the trip pieces that will also provide support for the shelves and provide the front lip on the shelf to keep the books from slipping off. Also, I had to drill holes to receive the cross braces that will keep the books from falling forward.

So, I milled up some 3/4"x2" pieces, routed a profile on them and also put a 3/8"x3/4" dado in the back of the trim pieces so that they will slip into the front of the shelves.

From Book Nook

This is a shot that gives you an idea of the profile and the lip the trim puts on the shelf (my photography isn't too good)

From Book Nook

Once that was done, I had to drill the holes to receive the dowels for the cross braces. To do this, I used the same process where I lay the sides back-to-back so that when I lay out the places for the holes they will be perfectly aligned.

From Book Nook

From Book Nook

Ok, once that was all done, I had to take some time and put a profile into the sides of the book nook so that they weren't just square and boring. So, after about 12 tries, here is what I came up with.

From Book Nook

I'm pretty pleased with that look and I think once it is done will give it a nice profile/look.

Ok, once that was all done, I did a quick dry fit and then it was time to glue it up! Big milestone...

Let me just first say, this was the most frustrating glue up I have EVER done. Oh man, did I ever need an extra set of hands to do this. Anyways, I got it done and below are a couple shots of the sides, shelves and braces all glued up. NOTE: notices the top back piece is also in; I had to do this because I had to put dados into the back to receive the back; you can see that dado in the pictures above.

From Book Nook

From Book Nook

Now, I just have to let that set for a while to dry up and then I will come back and glue all the trim pieces on. Once that is done, it is the pains taking task of removing any glue squeeze out and final sanding and then it is "off to the finishing room". I can see the light at the end of the tunnel!

Be Safe!

Dovetails - Practice, Practice, Practice

One of the things I really want to do as a woodworker is get better at cutting dovetails by hand. This always seems to be a crowning moment for a woodworker, and is one of the highest achievements it seems. I think it is a mental thing, but once you can, consistently, cut high quality dovetails by hand, you feel like you can do anything in woodworking. So, I'm on a quest to get better at them, by hand. I've read a couple books, watched some videos and even tried some on my own; not successfully mind you. One of the things that I have read, and watched, over and over is to practice cutting straight lines. And I thought "Practice?! Practice? Are we talking about practice?" heck, I can cut a straight line, I don't need to do that! Well, if I can cut a straight line, every time, then why can't I get good dovetails? So, putting my ego aside, I decided to do what many expert woodworkers probably did in their apprenticeship....practice.

So, I set out to cut a bunch of lines to get used to cutting on a straight line, but also cutting to my scribe line, or shoulder line. I took a slightly different approach though; see, when you practice something, you practice in the same way you would execute whatever it is you are practicing for. So, in that spirit, I decide to no just cut straight lines, but to practice the types of cuts you would make when doing dovetails, skewed cuts and angled cuts. So, with that, I grabbed a piece of 3/8" walnut, laid out a bunch of lines, and started cutting.

From Misc Woodworking

Here you can see that, for the most part, I can cut a straight enough line; some on the left got a little crazy, but what I noticed is I need to do a better job of cutting to the line as on several of these, I went right past it.

This is a shot of the top of the practice board. Again, consistent angles all parallel to each other. These were laid out to simulate the types of cuts used when cutting the pins of a dovetail.

From Misc Woodworking

Next I grabbed a piece of 3/8" mahogany and made a series of cuts that would simulate cutting the tails.

From Misc Woodworking

Again, pretty consistent, but still room for improvement. My cutting to the line was much better on this one.

All-in-all, I think my cutting is pretty good. I definitely am going to do another round or two of practice cuts to get even more consistent; I also think I am going to practice cutting to save the line;personally, I think this is why mine just don't come out well. So, practice, practice, practice I shall do!

Be Safe!