Shaker Table - Home Stretch!

Well, I am in the home stretch of this project. The last thing I needed to do was build the drawer and put the drawer runners in. The drawer is made of maple with a Tiger Maple front. I really like the way the tiger maple compliments the cherry, especially as it darkens. So, here are a couple shots of the drawer, through dovetails in the back, and half blind dovetails in the front.

From Shaker Table

From Shaker Table

Here is a shot of the tiger maple drawer front. You can see the figure in the grain and this will be drawn out with the oil and shellac finish I am putting on it.

From Shaker Table

Well, that is all for now; next time I have pictures it should be all complete. The finish for this is really simple; I am using three coats of tung oil finish and then 3-5 coats of shellac and polished out.

Be Safe!

Woodworking blog Woodworking Magazine - A Dovetail a Day – Hurray

So, the other day I was just posting on how I am practicing my dovetail cuts so that I can get better at hand cut dovetails. Well, yesterday, Chris Schwarz posted a blog entry about an article he did 2007 where he set out on the same task as I am undertaking. What he did was to make a dovetail a day until he got better at it. One of his readers, Bob Jones, followed along and did a dovetail a day for 90 days! I don't know if I can manage one a day with my schedule or not, but it is definitely worth a shot if I can get results like Chris and Bob. The blog post is below and a free copy of the original article can be found, either at the bottom of that post or here: FREE DOVETAIL ARTICLE

Woodworking blog Woodworking Magazine - A Dovetail a Day – Hurray

Dovetails - Practice, Practice, Practice

One of the things I really want to do as a woodworker is get better at cutting dovetails by hand. This always seems to be a crowning moment for a woodworker, and is one of the highest achievements it seems. I think it is a mental thing, but once you can, consistently, cut high quality dovetails by hand, you feel like you can do anything in woodworking. So, I'm on a quest to get better at them, by hand. I've read a couple books, watched some videos and even tried some on my own; not successfully mind you. One of the things that I have read, and watched, over and over is to practice cutting straight lines. And I thought "Practice?! Practice? Are we talking about practice?" heck, I can cut a straight line, I don't need to do that! Well, if I can cut a straight line, every time, then why can't I get good dovetails? So, putting my ego aside, I decided to do what many expert woodworkers probably did in their apprenticeship....practice.

So, I set out to cut a bunch of lines to get used to cutting on a straight line, but also cutting to my scribe line, or shoulder line. I took a slightly different approach though; see, when you practice something, you practice in the same way you would execute whatever it is you are practicing for. So, in that spirit, I decide to no just cut straight lines, but to practice the types of cuts you would make when doing dovetails, skewed cuts and angled cuts. So, with that, I grabbed a piece of 3/8" walnut, laid out a bunch of lines, and started cutting.

From Misc Woodworking

Here you can see that, for the most part, I can cut a straight enough line; some on the left got a little crazy, but what I noticed is I need to do a better job of cutting to the line as on several of these, I went right past it.

This is a shot of the top of the practice board. Again, consistent angles all parallel to each other. These were laid out to simulate the types of cuts used when cutting the pins of a dovetail.

From Misc Woodworking

Next I grabbed a piece of 3/8" mahogany and made a series of cuts that would simulate cutting the tails.

From Misc Woodworking

Again, pretty consistent, but still room for improvement. My cutting to the line was much better on this one.

All-in-all, I think my cutting is pretty good. I definitely am going to do another round or two of practice cuts to get even more consistent; I also think I am going to practice cutting to save the line;personally, I think this is why mine just don't come out well. So, practice, practice, practice I shall do!

Be Safe!