CA Pen Finish - mixed results

So I've been in a pen turning mode for a while; I'm having some fun with it, creating different designs on some slim line pens. I've been using a few different finishing techniques as well. One is Shellac/Wax called Shellawax Cream. It is super easy to use, just put some on a paper towel and apply while the lathe is spinning. It creates a nice finish, not super glossy and has a good feel. Next I tried a friction polish, which is a lacquer based finish, in a semi-gloss. This is really easy to use as well; just apply to a paper towel and apply to the piece as it's spinning. I like this finish as well, but I think I would like something with a bit more shine so I might try the high-gloss. Lastly, it brings me to the CA finish. I've tried this a couple different way. First, I tried it by simply applying it to the piece and wiping it on quickly, letting it set, apply another coat, etc up to 3-5 coats. Then I let it dry for a while and then wet sand it up to 2000 grit. This actually came out really nice, but was a bit fussy at first. Next, I read about using BLO with CA so I tried that. That is really easy to do, but I don't seem get the nice high-gloss finish that I do with just the CA build up. I'm applying BLO to the paper towel, and then CA over that. For some reason, it doesn't seem to build up as well. I would love some feedback on how others use the CA process; I've watched a couple videos online about it, and read through some articles, but I'm just not "getting it" so far, but I'm going to keep trying.

The pen below was finished with the BLO and CA combination the I outlined above, it is made from Tiger Maple. It came out well, but I would like a bit more gloss finish on it. I'm thinking I should have put a couple more coats on and then wet sand it. I will try that next.

From Pen Making

Pen Making - First attempts

In my other post I mentioned that I had bought the Penn State Industry pen making starter kit (found here) I've been having some fun with the kit; I never knew pen making was so easy. You can whip these suckers out in 15-20 minutes depending on what design you use. Well, I finally got around to taking some pictures of some that I've made.

From Pen Making

These are in chronological order from left to right. They are all made from Rosewood except the one on the right, that Padauk. The middle two were made for a friend of mine and it is a pen and pencil set.

So now I'm in the process of making some more from other woods such as cherry, mahogany and tiger maple. I've also ordered different kits from some other sources, specifically www.woodturnerscatalog.com I ordered some roller ball kits from here. I'm looking to try different kits from different sources, but I've only found a few so if anyone has some recommendations, I'm all ears. Thanks for looking!
Be safe!